Types Of Cord Of Wood
The pickup truckload of cord of wood is the amount of wood that can fill a truck or the amount that a truck can carry. A cord of wood is the measurement of the volume of timber. A block of wood weighs differently in different conditions.
The weight of wood depends on how green or dry it is and on the water content. The weight of an average cord of seasoned wood is between 2000 and 3000 pounds, and you can carry it in a 1/ 2 ton or 3 /4-ton pickup truck. Let us learn more about how the truckload of wood is measured.
Weight of dry seasoned cord | cord of wood size
Firewood dealers sell wood in the form of cords, and any unit of stacked wood contains 25 percent of empty space, and it can be more in case of rough logs. Since firewood is usually not sold in full cords, there are many things that you need to consider to find its best value while buying.
Understand the terminology of wood
Dimensions and volume of a full cord
The first thing is to measure the dimensions and volume of a full cord of wood. A full-length cord of wood measures 4 feet tall, 4 feet wide and 8 feet long. The total volume is approximately 128 cubic feet. The quantity of solid-wood in a cord varies according to the size of a piece. However, most cords are 85 cubic feet of solid wood, and the remaining volume is air.
If the cord is a standard unit of measurement for wood sellers, most dealers don’t sell the long pieces to home customers. As a result, the need for cord terminology comes into play.
Full Cord and Face cord
A face cord is a standard unit for measurement. It refers to the stacks that are 4 feet high and 8 feet long. The width or depth of the woodpile is less than 4 feet. It means that every piece of wood is less than 4 feet.
A thrown cord is an approximate measurement of volume that is dumped or tossed into a truck. A thrown cord can take 30 percent more space in a truck than a stacked cord. As a thrown cord takes 30 % more space than stacked, a 6 feet truckload has 30% + of a ‘thrown’ cord, and an 8 feet truckload has 45% + of a ‘thrown’ cord.
A green cord is the measurement taken before the wood gets split or dry. The weight and volume of the wood get decreased after drying as the water content dries up. When the unseasoned green wood dries up, it can shrink by 6 to 8 percent. Firewood dealers fool the customers by measuring and pricing their merchandise by green cord rather than full or loose cords to make money. Sometimes the dealers use rough measurements like piles, truckloads, and wagon loads to sell the wood. Such rough measurements are not regulated and difficult to compare. Therefore, customers might get less amount to wood for the money they pay to the firewood dealers.
Pickup truckload capacity of different trucks
The pickup truckload capacity of a truck depends on its size and the area of the rear tray on which the wood is loaded. More the area of the UTE tray, more cords one can load into the truck. The number of cords that you can load also depends on the power of the truck and the laws of the state for the loading of vehicles.
A small pickup with or without racks can hold one half (1/2) cord of wood, and a short-bed pickup truck can also hold the one-half cord of wood with or without racks. Your normal pickup truck holds roughly one half of a full cord of seasoned firewood, so make sure you are getting what you pay for
Long Bed Pickup
A long bed pickup truck can hold one half (1/2) cord of wood without racks. If the owner uses racks on the pickup, it can hold one full cord of wood (128 cubic feet) that is double the quantity without frames.
A standard truck without racks can hold half to one cord of wood, but with stands, it can hold up to one and a half cords (1-1/2) of wood.
Now the question arises that how much wood can a truck hold or carry. As trucks vary in size, dimensions, and load bearing capacity, the answer depends on all these factors. Usually, a pickup truck having a bed or 8 foot can hold around one-half cord of wood, while a truck with 6-foot bed can hold only one-third of a cord of firewood.
Split or staked wood
It is quite easy to load the round of wood into a pickup truck, but loading the wood in the split form allows you to carry more in a single trip. You can load more wood in your vehicle if you stack the split wood in bed than throwing it randomly in the truck. Splitting and stacking the wood allows you to load more wood in your vehicle, but it also increases the overall load significantly.
Maximizing a pickup truck’s capacity allows you to save money on fuel and also your time. You need to make fewer trips than carrying unsplit or unstacked wood on your truck.
Installing the sideboards on your pickup truck can let you double the loading capacity, but you need to take care of the safety limit. One-half cord of firewood can weight approximately 2000 pounds. If your truck is not meant to hold more than that, you should not load beyond this value. Operating an overloaded truck is dangerous and put you in unnecessary trouble as per the vehicle laws.
The pickup truckload of every wood is different, and it depends on a variety of factors. Professional services like tree removal Blacktown can help you remove the trees and measure the truckload of any wood. Knowing the pickup truckload can help the landscapers, firewood dealers and buyers to set the right pricing and load on their trucks.