tools reviews


15 Must-Have Tools for Beginner Auto Mechanic | Automotive Tools No One Can Ignore

Auto Mechanical Tools No One Can Ignore

abc news


Having an auto vehicle, whether it be an SUV or even a bike, vehicles have sure become one of the most important parts of our lives, and without them, we would be completely isolated. Auto maintenance is very important and is not possible without right tools.

However, the next responsibility after owning an auto is knowing some basic techniques of an auto mechanic as autos need some service and repairs which are quite straightforward and doing it yourself rather than going to some shop might save you quite a handsome amount of fortune.

Below listed are 15 must-have tools that you should have if you are a beginner mechanic or merely a home mechanic.

Automotive Tools No One Can Ignore | Must Have Tools For Auto Mechanics


1. Oil Filter Wrench

Oil change is among the most occurring duty you will be assigned as a beginner because frankly, pros don’t waste their time for such petty tasks.

Initially, just get two or three different sized oil wrenches so they can fit into any size of oil filters.


2. Screw-Drivers

impact driver

As you may have anticipated, this is one of the most general tools of all and come handy in nearly any work you do related to maintenance or repair of the auto.

However, keep it in mind that you will only be needing the flat and cross screwdrivers and so you do not have to buy the whole set but sometimes it is much cheaper to buy the whole set instead so in such case you may go for the whole set.


3. Multi-meter

This is necessary, especially when you have a case involving hot wires. It helps to diagnose the problematic wire whenever you run into some issue.


4. Vise-Grip

These are mandatory, even if you are on a budget as they are pretty much everything you need when you are stuck on tight nuts and bolts. You got to be very careful because the markets are flooded with fake ones so make sure you pick a genuine one.

They can come in very handy when fixing old car models. These are often sold in set of 4 but you have to get the classic one for sure, the rest is dependent on you.


5. Funnels

There are a lot of funnels available but a beginner mechanic requires only two, a small one for oil changes and a long one for filling transmission fluid.

They pretty much fulfill all your needs. However, you can get more for your ease. You should get the funnels which have the opening of a size same to most common engine oil fill plugs.


6. Hammer

Automotive Tools

Don’t get confused by the different sizes, just buy a big one and a small one. They come in different shapes so choose the ones you’re most comfortable with. Learn more about fixing auto body damage.

The big one is used for heavy-duty like drum brakes or tie rods while you should prefer a small one where you want to keep things from breaking.


7. Pry Bar

There are full kits or different pry bars available. If on a budget, you should go for one good quality multi-purpose pry bar instead of buying the whole low quality set as they are prone to breaking or bending.


8. Tire Pressure Gauge & Inflator

air tools

Tire jobs and their maintenance is one of the most common jobs as a beginner mechanic. At times these instruments may be used 10 to 20 times in the day, so they are very the important to have in possession.

In addition, you have to make sure to buy the best quality gauge as wrong measurements could be disastrous.


9. LED Work Light

This may be optional for some of you as some shops provide this to you and you do not have to buy it yourself however it is highly recommended to buy one and keep it along at all times as if you don’t have them, you just can’t work at night. Mechanic flashlight is a tool that can go a long way.


10. Pick Set

They come cheap and are highly useful. Are usually used for removing oil cartridges filters and door handle locking pins.


11. Automatic Wire Stripper

This one is a must-have if you have electrical work involved. Helps keep your fingers saved from things like razor blades and will save a whole lot of time.

The stripper can set to different sizes and can be used on any wire size.


12. Wrench Set

Ingersoll Rand Drive Air Impact Wrench

This one is pretty obvious. A wrench set is a must for any kind of mechanic. Your foremost priority should be buying the metric ones and then if the budget is big then you can go for ratchet ones next.


13. Ratchet and Sockets

Best Socket Sets

Three ratchets are necessary as for the beginners. A 1/4”, 3/8”, and 1/2” with their respective matching socket sets.

This one is used very often so you should use a high quality one so it’s robust and doesn’t wear out.


14. Impact Gun

Best Cordless Impact Wrench

As useful as any other tool, cordless impact guns are trendy nowadays and you too should go for the cordless one and make sure you buy a top-notch product.


15. Pliers

Pliers

Buying pliers can prove to be more difficult than you would have imagined, mainly due to the difficult choice you have to make. There are many different shapes, models and lengths which may leave you confused.

The choice is yours to make, whatever you feel more appropriate but be sure to buy at least 3 pliers, namely normal, long-nosed and cutter-pliers. The rest you can choose as you like and any number.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.